Ngff M2 SSD Solid State Internal Hard Drive
Product Specifications of M.2 NGFF SSD Solid State Drive:
Product Code |
JHW-M2 |
Interface |
M.2/NGFF |
Flash |
MLC |
Density |
60/120/240/480GB |
Max Transfer Performance (Varies by density) |
Read: 559MB/s
Write: 514MB/s |
ECC |
BCH ECC 66 bits/1KB |
Operating Voltage |
+3.3V(±5%) |
Power Consumption
(Varies by density) |
0.25W(idle)
2.94W(active) |
Operating Temperature |
0-70ºC |
Storage Temperature |
-40-85ºC |
Humidity |
5%-95% |
MTBF |
2,000,000 Hours |
Shock |
50(G),11(ms), half-sine wave |
Vibration |
3.1G(2-500Hz) |
Dimension(mm) |
60.00*22.00*3.20mm |
Weight(g) |
≤5.4g |
Introduction
ARTANIS NGFF provides three different dimensions, 22*42mm, 22*60mm, 22*80mm, and offer scapacity from 16GB to 256GB. NGFF is an ideal storage solution for ultrabook as it is smaller than mSATA. The NGFF SSD product electrically complies with the SATA III standard and is electrically compatiblewith a serial ATA disk drive. In order to meet the high quality, the NGFF SSD products utilize Multi-Level Cell (MLC) NAND Flash Memory. Moreover, to ensure the data integrity, many advanced technologies are used such as dynamic bad block management, dynamic and static wear leveling, and error correction code (ECC).
The NGFF SSD drastically outperforms conventional Hard Disk Drives. In addition, the NGFF Series could also provide rugged features in industrial PC under an extreme environment with a high MTBF.
Supports SATA interface rate of 6Gb/s
The new form factor standard for ultra book
Ultra this designed
Increasing capacity by length